FRAMES
DOORS
STANDARD
STANDARD STEEL DOORS
Doors ready for delivery within 2 weeks
de La Fontaine, specialists in the manufacture of quality steel doors.
The technical expertise of our skilled team, combined with the use of modern, highperformance equipment, allow us to innovate, enhance industry standards, and meet your needs effectively. We guarantee that our standard door models will be ready for delivery within 2 weeks.
STANDARD STEEL DOORS OPTIONS
|
DOOR SEAMS AND SERIES
DOOR CORES
DOOR EDGES
END CHANNELS
DOOR VISION KITS AND LOUVERS
STANDARD DOOR HARDWARE REINFORCEMENTS
DOOR MODELS
|
DOORS DETAILS
|
PA SERIES: Standard, lock seam on edge construction. Reinforced welded corners. Achieve 1,000,000 cycles as per ANSI A 250.4.
 |
PAF SERIES: Seamless, lock seam on edge construction. The seam is filled with industrial adhesive then putty-filled and ground smooth. Achieve 1,000,000 cycles as per ANSI A 250.4.
 |
CW SERIES: Seamless, continuously welded, internally steel channeled stiles, 18-gauge (0.044''/1.1 mm) or 16-gauge (0.056''/1.4 mm). Fully welded centered seam, no putty. Achieve 6,000,000 cycles as per ANSI A 250.4.
 |
 HONEYCOMB (HC):
1'' (25.4 mm) cell with phenolic resin. Compression ratio: 1875 lbs per sq/ft. |
 POLYSTYRENE (STY):
solid block, R value: 7.03 (hr °F-sq/ft)/BTU U value: 0.14 BTU/(hr °F-sq/ft) URETHANE (URE): solid block, R value: 8.66 (hr °F-sq/ft)/BTU U value: 0.12 BTU/(hr °F-sq/ft) |
 STEEL STIFFENED (STL):
with vertical 18-gauge (0.044''/1.1mm) steel stiffeners, 6'' (152 mm) on C/L with solid polystyrene block or solid urethane block. |
 TEMPERATURE RISE:
solid mineral block, 250°F, 450°F. |
|
BEVELED EDGE DOOR 87-degree angle to the door face (1/8'' (3.2 mm) in 2'' (50.8 mm)), standard on active door.
 |
SQUARE EDGE DOOR 90-degree angle to the door face, standard on strike stile of inactive door.
 |
SEGMENTED RADIUS EDGE for double acting door. The seam is filled with industrial adhesive then putty-filled and ground smooth. Available in PA series only.
 |
|
STANDARD, INVERTED STEEL CHANNELS, projection welded, 16-gauge (0.056''/1.4 mm) or 14-gauge (0.071''/1.8 mm).
 |
FLUSH STEEL CHANNELS, PROJECTION WELDED, 16-gauge (0.056''/1.4 mm) or 14-gauge (0.071''/1.8 mm), not sealed.
 |
FLUSH STEEL CHANNELS, PROJECTION WELDED, 16-gauge (0.056''/1.4 mm) or 14-gauge (0.071''/1.8 mm), putty-filled seam and ground smooth, sealed.
 |
FULLY CONTINUOUSLY WELDED CENTERED SEAM, no putty. Flush internal steel channels, 16-gauge (0.056''/1.4 mm) or 14-gauge (0.071''/1.8 mm).
 |
STANDARD INVERTED STEEL CHANNELS with screwed-in PVC (plastic) top cap.
 |
 STANDARD TWO-PART
sandwich-type vision kit, welded corner sections, 18-gauge (0.044''/1.1 mm). Available for ¼'' (6.3 mm) to 1'' (25.4 mm) thick glass. Option N |
 TWO-PART
sandwich-type vision kit with muntins, 18-gauge (0.044''/1.1 mm). Only available non-rated and for ¼'' (6.3 mm) thick glass. Option N-G |
 DLF FLUSH
vision kit, inserted between door faces, 16-gauge (0.056''/1.4 mm). Spot welded, available for ¼'' (6.3 mm) to 1'' (25.4 mm) thick glass. Option P |
 FLUSH SEAMLESS DLF,
vision kit, 16-gauge (0.056''/1.4 mm). Spot welded, available for ¼'' (6.3 mm) to 1'' (25.4 mm) thick glass. Option O |
 STANDARD TWO-PART
sandwich-type louver, inverted “y” blades, welded corners, 50% free-flow area,18-gauge (0.044''/1.1 mm), non-rated only. Option U |
 HIGH FREQUENCY HINGE,
10-gauge (0.129''/3.3 mm). |
 CYLINDRICAL LOCK REINFORCEMENT,
12-gauge (0.105''/2.7 mm) lock front, 18-gauge (0.044''/1.1 mm) spacer. |
 MORTISE LOCK REINFORCEMENT,
12-gauge (0.105''/2.7 mm) lock front, 16-gauge (0.056''/1.4 mm) box. |
 FLUSH BOLT REINFORCEMENT,
12-gauge (0.105''/2.7 mm) tabs. |
 STANDARD ANSI 4 7/8'' (123.8 mm) STRIKE REINFORCEMENT
16-gauge (0.056''/1.4 mm). |
 C6 MODEL
|
 C7 MODEL
|
 C7a MODEL
|
 C7b MODEL
|
 C8 MODEL
|
DOORS TECHNICAL SECTIONS
| © 2010 de la Fontaine |